 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| E-Series RF 1:4 Transmission Line Step-up Transformer 6 - 1000 MHz Features * * * * 1:4 Impedance Ratio CT on Secondary Surface Mount Tape and reel packaging available ETC4-1T-7 V4 SM - 22 Package Description M/A-COM's ETC4-1T-7 is a 1:4 RF transmission line step-up transformer in a low cost, surface mount package. Ideally suited for high volume cellular and wireless applications. Typical applications include single to balanced mode conversion and impedance matching. Parts are packaged in tape & reel. Electrical Specifications: TA = 25C, Z0 = 50 1 Parameter RF Frequency Insertion Loss Amplitude Unbalance Phase Unbalance Test Conditions -- FL--fU FL--fU FL--fU Frequency 6 - 1000 6 - 600 600 - 1000 6 - 1000 6 - 1000 Units MHz dB dB Degrees Min -- -- -- -- -- Typ -- -- -- -- -- Max -- 2.0 3.0 1.0 10 Absolute Maximum Ratings 1 Parameter RF Power DC Current Operating Temperature Storage Temperature Ordering Information Part Number ETC4-1T-7TR Absolute Maximum 250 mW 30 mA -40C to +85C -55C to +125C Package Tape and Reel (2000 piece Reel) 1. Operation of this device above any one of these parameters may cause permanent damage. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. E-Series RF 1:4 Transmission Line Step-up Transformer 6 - 1000 MHz Pin Configuration Pin No. 1 2 3 4 5 ETC4-1T-7 V4 Schematic Function Secondary Dot Secondary CT Secondary Primary Primary Dot Primary Dot 5 1 Secondary Dot 2 Secondary CT Primary 4 3 Secondary Typical Performance Curves Insertion Loss 0.00 -0.50 -1.00 -1.50 Phase Unbalance dBm -2.00 -2.50 -3.00 -3.50 -4.00 6.00 106.00 206.00 306.00 406.00 506.00 606.00 706.00 806.00 906.00 MHz Amplitude Unbalance Input Impedance 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. |
Price & Availability of ETC4-1T-71
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |